MACHINERY FOR THE MANUFACTURE OF "HANDMADE" STYLE BRICKS FROM SOFT CLAY
Warning: Last items in stock!
|MAY BE VIEWED||Forlì (Italy)|
Machinery for the manufacture or bricks,
handmade style, in soft clay, composed of:
1- Silos with screw for feeding mixed clay on to the conveyor belt.
2- Conveyor belt of approx. 15 m length and 700 mm useful width, complete with protection panels, to transport the clay to the filling machine.
3- Machine for he manufacture of "handmade" style bricks with a production rate of 90 boards/hour of approximately 1,850 mm length, complete with electric panel for the automatic control and adjustment of the filling rate according to the conslstency of the clay.
4- Automatic advancement of the boards (size 500x1850 mm) each time.
5- Positioning of the multiple mould.
6- Automatlc sanding of the board and the mould.
7- Automatlc dosage of the clay,while keeping it stirred, and filling and scar-ping to level the top of the mould
8- Manual finishlng of the upper surface (to manufacturers design)
9- Automatlc extractlon of the fresh bricks from the mould.
10- Extraction of the moulds from the washing machine and sanding for another cycle
11- Sanding station for the moulds
12- 2 units for automatic loading and unloading of the moulds between the production line and the washing line.
13- Automatic washing station for the moulds with a conveyor belt for transport of the moulds and a pressure washer with pump and rotating nozzles, protection hood and tank for the collection of the water for the first decanting, that you will collect from the drain pipe.
14- Shifter to move the brick carrying boards from the production line to the board transporter
15- Transporter for brick carrying boards to your point of interest for the collection of full boards
16- Feeder of boards one at a time from existing store to the production line
17- Silos for storing sand
18- Screw feeder for the sand from the silos whose timing can be controlled from the electric panel. The screw feeder is complete wlth hopper and support frame with a total helght of about 2 m.
19- Electric panel with software
20- A series of moulds with 6 or 7 elements for the manufacture of:
1) bricks (12x25x5.5),
2) bricks (14x28x5.5),
3) bricks (15x30x5.5)
4) tiles (14x28x3.5),
5) tiles (14x28x3.5),
6) tiles (15x30x3.7),
7) tiles (15x30x5.8),
8) tiles (18x36x2.2),
9) tiles (18x36x3),
10) tiles (20x40x3).